Nagpur, Maharashtra
GST No. 27AMPPS8870F1Z9
Call 08048989600
Send Enquiry
Minimum Order Quantity: 10 Vial
| Strength | 250 mg/ml |
| Packaging Size | 10 ml |
| Pack Type | Vial |
| Brand Name | Testo-E Injection |
| Manufacturer | Powerbolic Labs |
| Country of Origin | Made in India |
Sealed 1 ml glass ampoule
Standard concentration: 250 mg/ml
Single-use, pre-measured dose
Testosterone Enanthate – 250 mg
Carrier oil (usually sesame, cottonseed, or castor oil)
Benzyl alcohol (as preservative)
Absolute sterility – one-time use = no contamination risk
Fixed 250 mg dose = no measuring errors
Favored in hospital/TRT/pharmaceutical settings
Perfect for first-time users wanting short trials
Hassle-free for TRT patients prescribed a weekly or biweekly shot
Often pharma-grade in origin
Fixed dose – no flexibility (you must inject the full 1 ml)
Breaking glass can be inconvenient or risky
More expensive per mg
Need multiple ampoules for multi-week cycles
10 ml multi-dose vial
Common strengths:
250 mg/ml (most common)
Sometimes available as 300 mg/ml in UGL (underground lab) products
Total content: 2,500–3,000 mg testosterone per vial
Same as ampoule:
Testosterone Enanthate
Carrier oil
Benzyl alcohol
⭐ Most widely used format among athletes and bodybuilders
Allows precise custom dosing: e.g., 125 mg, 200 mg, 300 mg
Excellent for long-term TRT, bulk cycles, and test stacks
⭐ Cost-effective for full cycles
Convenient — draw exact dose with sterile syringe
Can stack easily with other injectables (Deca, Primo, EQ, etc.)
Requires proper sterile technique with each draw
Must disinfect rubber stopper and use new needles
Slight risk of contamination if carelessly handled
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Packaging Size | 10 ml |
| Packaging Type | Vial |
| Brand | Tren-A 100 |
| Manufacturer | Powerbolic Labs |
Comes in a 1 ml sealed glass ampoule
Typically contains 100 mg of Trenbolone Acetate per ml
Trenbolone Acetate – 100 mg/ml
Carrier oil (e.g. sesame, cottonseed)
Benzyl alcohol (preservative)
�� Single-use sterile unit — no contamination
Each ampoule = pre-measured 100 mg dose
Convenient for short trials, first-time users, or one-time shots
Sterility is guaranteed — sealed and unexposed to air
Accurate dosing = no measuring mistakes
Less risk of multi-use bacterial contamination
No flexibility — fixed 100 mg dose
Must use entire content once opened
Breaking ampoule glass is inconvenient and can cause injury
Expensive and not widely available (rare format)
Unsuitable for frequent injections unless you stock many ampoules
10 ml multi-use glass vial
Common strengths:
100 mg/ml (standard)
Sometimes 150–200 mg/ml in UGL products
Total content: 1,000–2,000 mg per vial
Trenbolone Acetate
Carrier oil (same as ampoule)
Benzyl alcohol and sometimes benzyl benzoate (to ensure stability)
⭐ Most commonly used format
Flexible dosing — draw any quantity with sterile syringe
Economical and convenient for full cycles or stacks
Ideal for 6–10 week cutting cycles
Allows dose adjustment: 50 mg, 75 mg, 100 mg, etc.
Practical for every other day or daily injections
Long shelf life if stored hygienically
Multi-use = must maintain sterile technique
Improper handling may lead to contamination
Must be stored properly: cool, dark place
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 200 mg |
| Packaging Size | 10 ml |
| Packaging Type | Vial |
| Brand | Tren-E |
| Manufacturer | Powerbolic Labs |
only
�� 1. Tren E Ampoule – Detailed Description �� Packaging:Comes in a 1 ml sealed glass ampoule
Usually contains 200 mg/ml Trenbolone Enanthate
Trenbolone Enanthate 200 mg
Carrier oil (e.g., sesame, castor, cottonseed oil)
Benzyl alcohol as preservative
Single-use format = guaranteed sterility
Fixed 1 ml (200 mg) dose
May be used by users testing tolerance or running short trials
�� Sterile and hygienic — no contamination risk
Pre-measured dose — no over/under drawing
Preferred in clinical-style or high-end UGL packaging
❌ No flexibility in dose
❌ Inconvenient — must break glass
❌ Requires multiple ampoules for long cycles
❌ More expensive per mg
❌ Very rare — Tren E is almost always sold in vial form
10 ml multi-dose glass vial
Most common strength: 200 mg/ml
Total content: 2,000 mg per vial
Trenbolone Enanthate 200 mg/ml
Same carrier oil and preservative as ampoule
⭐ Most widely used format
Ideal for 8–12 week structured cycles
Flexible — users can draw any dose: 150 mg, 250 mg, etc.
Compatible with Test Enanthate, EQ, or Dianabol stacks
✅ More economical for longer cycles
✅ Flexible dosing — tailor to user needs
✅ Easier to store and reuse
✅ Less injection volume needed compared to short esters (e.g., Tren A)
Must maintain strict hygiene when reusing
Slight risk of vial contamination if mishandled
Requires proper storage and handling
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Packaging Type | Vial |
| Packaging Size | 10 ml |
| COMPOSITION | Drostanolone |
| Brand | Masteron |
| Manufactured by | Evolve Biolabs |
Drostanolone Propionate
📦 Form:1 ml sealed glass ampoule
Typically contains 100 mg/ml concentration
Single-use, sterile injection format
Manufactured by Evolve Biolabs
Masteron Ampoule is a fast-acting injectable steroid designed for hardening, muscle definition, and dry gains. Due to its short ester (Propionate), it begins acting quickly, making it highly effective in cutting phases and pre-contest cycles.
The ampoule format offers precise single-use dosing, favored by some for sterility and convenience—especially for short cycles or when traveling.
💪 Key Benefits:Promotes a dry, lean, and vascular look
Ideal for cutting and body recomposition
Excellent anti-estrogenic effect — lowers SHBG and estrogen impact
Enhances muscle hardness without water retention
Best used in fast-paced, short cycles
Requires frequent injections (every other day)
Less cost-effective for long-term cycles
Breaking ampoules can sometimes lead to waste or glass fragments
Drostanolone Propionate
📦 Form:10 ml multi-dose vial
Typically contains 100 mg/ml concentration
Rubber-stopper sealed vial for multiple withdrawals
Manufactured by Evolve Biolabs
Masteron Vial offers the same fast-acting anabolic benefits as the ampoule but in a multi-use vial format, making it more practical for users running full cutting cycles. It supports muscle preservation, aesthetic refinement, and estrogen control, often used in lean stacks with Testosterone or Winstrol.
The vial format is widely preferred for its cost efficiency, ease of access, and reduced packaging waste over extended use.
💪 Key Benefits:Excellent for physique enhancement, contest prep, and dry bulking
Maintains strength and fullness while shedding fat
Combats estrogenic side effects (mild AI effect)
Smooth, clean oil for easy intramuscular injection
Consistent blood hormone levels when dosed regularly
Must be handled with proper sterile technique
May require refrigeration in hot climates (check label)
Injections needed 3x per week due to short ester
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg/ml |
| Packaging Size | 10 ml |
| Pack Type | Vial |
| Brand Name | Test-E |
| Manufacturer | Evolve Biolabs |
| Country of Origin | Made in India |
Testosterone Enanthate
📦 Form:1 ml sealed glass ampoule
Contains 250 mg/ml of Testosterone Enanthate
Oil-based, long-acting injectable steroid
Single-use, sterile glass unit
Manufacturer: Evolve Biolabs
Test E Ampoule provides a single, accurately measured dose of Testosterone Enanthate, a long-acting ester of testosterone used for hormone replacement, mass gain cycles, and strength enhancement. The ampoule format is preferred by those seeking sealed sterility, especially for short courses, test injections, or medical use.
💪 Key Benefits:Stable testosterone levels for 5–7 days
Supports muscle growth, libido, and mental focus
Ideal for bulking or long-term TRT regimens
Low injection frequency (1–2 times/week)
Useful for trial dosing or travel-friendly protocols
Less cost-effective for multi-week cycles
Must open a new ampoule each time
Ampoules are breakable and less convenient for frequent use
Testosterone Enanthate
📦 Form:10 ml multi-dose vial
Contains 250 mg/ml of Testosterone Enanthate
Oil-based intramuscular injection
Sealed rubber stopper with aluminum cap
Manufacturer: Evolve Biolabs
Test E Vial is the most commonly used and economical format of Testosterone Enanthate, especially for those on multi-week cycles or long-term testosterone therapy. It allows for consistent weekly dosing, smoother hormone stability, and cost-effective use over time. This format is favored by bodybuilders and hormone clinics alike.
💪 Key Benefits:Extended-release profile supports steady testosterone elevation
Promotes mass gain, recovery, and performance
Convenient for stacking with compounds like Deca, Boldenone, or Dianabol
Lower frequency of injections compared to Propionate
More affordable for 12–16 week bulking or TRT protocols
Requires sterile technique for each withdrawal
Should be stored properly and used within a set period once opened
Mild water retention possible due to estrogen conversion
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Packaging Size | 10 ml |
| Packaging Type | Vial |
| Brand | Trenabol |
| Manufacturer | Evolve Biolabs |
Trenbolone Acetate
📦 Form:1 ml sealed glass ampoule
Typically contains 100 mg/ml of Trenbolone Acetate
Fast-acting, oil-based injectable solution
Sterile, single-use ampoule
Manufacturer: Evolve Biolabs
Trenabol Ampoule offers a potent dose of Trenbolone Acetate, known as one of the strongest anabolic steroids available. It is highly favored for cutting, recomping, and lean mass cycles due to its non-estrogenic, dry, and hardening effects. The ampoule format provides maximum sterility per use, ideal for short-term runs or precise, scheduled injections.
💪 Key Benefits:Rapid onset — visible results within days
Enhances vascularity, muscle density, and fat loss
Strong anabolic-to-androgenic ratio
No estrogen conversion — no water retention
Amplifies strength, aggression, and workout intensity
Requires frequent injections (usually every other day)
May cause night sweats, insomnia, or aggression
Ampoules are less convenient for long cycles
Not recommended for beginners due to its potency
Trenbolone Acetate
📦 Form:10 ml multi-dose vial
Contains 100 mg/ml of Trenbolone Acetate
Oil-based injectable
Rubber-stopper sealed vial
Manufacturer: Evolve Biolabs
Trenabol Vial is the most widely used format of Trenbolone Acetate due to its convenience, cost efficiency, and suitability for 6–8 week cutting cycles. It delivers powerful muscle-preserving and fat-burning effects, often used by experienced users looking to achieve dry, grainy muscularity.
This vial format is ideal for consistent EOD injections over several weeks and is often included in advanced stacking protocols.
💪 Key Benefits:Long-term cycle-friendly format
Improves hardness, definition, and recovery
Increases strength output and muscle fullness
Synergizes well with compounds like Test Prop, Masteron, or Winstrol
Highly anabolic, anti-catabolic, and non-aromatizing
Requires sterile handling for each draw
Not suitable for TRT-style use — too strong for long-term cruising
Can suppress natural testosterone production severely
Should be paired with testosterone base and PCT support
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Packaging Size | 10 ml |
| Packaging Type | Vial |
| Brand | Trenbolon |
| Manufacturer | Evolve Biolabs |
Trenbolone Enanthate
📦 Form:1 ml sealed glass ampoule
Contains 200 mg/ml of Trenbolone Enanthate
Oil-based injectable anabolic steroid
Single-use, sterile format
Manufacturer: Evolve Biolabs
Trenabolon Ampoule delivers a powerful, long-acting dose of Trenbolone Enanthate, a top-tier compound used by experienced bodybuilders for cutting, lean mass gain, and recomposition. It offers slow release, making it suitable for once or twice weekly injections. The ampoule format ensures maximum sterility and pre-measured accuracy, especially useful for short cycles or clinical control.
💪 Key Benefits:Strong anabolic and androgenic activity
Promotes lean muscle, dry gains, and fat loss
No aromatization – zero water retention
Increases strength, muscle hardness, and recovery speed
Long half-life: injection only 2× per week
Not for beginners due to its potency and side effects
May cause night sweats, aggression, or insomnia
Tren-specific side effects: cardiovascular strain, cough (Tren cough)
More expensive per ml than vial format
Best used under experienced supervision or protocol
Trenbolone Enanthate
📦 Form:10 ml multi-dose vial
Contains 200 mg/ml of Trenbolone Enanthate
Sterile oil-based injectable solution
Rubber-stoppered glass vial with aluminum seal
Manufacturer: Evolve Biolabs
Trenabolon Vial is the preferred format for running long-term or intermediate Tren cycles. With a consistent 200 mg/ml dose, this long-acting ester is ideal for users seeking deep muscle hardness, aggressive strength gains, and enhanced physique detail. The vial format makes it cost-effective, cycle-friendly, and practical for regular dosing protocols.
💪 Key Benefits:Sustained blood levels over 5–7 days
Powerful anabolic activity without estrogenic side effects
Helps retain muscle in cutting or caloric deficit
Often stacked with Testosterone Enanthate, Primobolan, or Masteron
Promotes vascularity, muscle dryness, and grainy look
Can cause tren-specific sides like anxiety, night sweats, low cardio tolerance
Requires strong PCT and on-cycle support
Must be handled with sterile care when withdrawing doses
Not suitable for long-term use or hormonal therapy
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg/ml |
| Packaging Size | 1 ml |
| Pack Type | Ampoule |
| Brand Name | Testorix-E |
| Manufacturer | Matrix Biolabs |
| Country of Origin | Made in India |
Testosterone Enanthate
📦 Form:1 ml sealed glass ampoule
Contains 250 mg/ml of Testosterone Enanthate
Oil-based injectable for intramuscular use
Single-use, sterile format
Manufacturer: Matrix Laboratories
Testorix E is Matrix’s formulation of Testosterone Enanthate, a long-acting testosterone ester commonly used in TRT protocols and mass-building cycles. It helps restore or enhance natural testosterone levels, promoting muscle growth, strength gain, fat loss, and overall well-being.
With a half-life of around 5–7 days, it offers stable hormone levels with weekly or bi-weekly injections.
💪 Key Benefits:Increases muscle mass, strength, and recovery speed
Supports libido, energy levels, and mood
Provides steady, long-lasting testosterone levels
Commonly used as a base compound in most anabolic cycles
Stacks well with agents like Deca, Boldenone, and Dianabol
Aromatizes to estrogen — potential for water retention, bloating, or gynecomastia
May require aromatase inhibitor use (e.g., Arimidex, Letrozole)
Suppresses natural testosterone — PCT needed after cycle
Possible injection site discomfort if not administered properly
Best used over 8–16 weeks for optimal anabolic effect
Mass-building and strength cycles
TRT and hormone restoration therapy
Used as a standalone or base compound in stacks
Effective in both beginner and advanced protocols
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg/ml |
| Packaging Size | 10 ml |
| Pack Type | Vial |
| Brand Name | Testoboon Depot 250 Mg |
| Manufacturer | Kachhela |
| Country of Origin | Made in India |
Testosterone Enanthate
📦 Forms Available:10 ml Vial – 250 mg/ml
20 ml Vial – 250 mg/ml
Oil-based injectable solution
Administered via intramuscular injection
Manufacturer: Testoboon (typically UGL or semi-pharma grade)
Testoboon Depot is a long-acting Testosterone Enanthate preparation designed to steadily release testosterone into the bloodstream. With a half-life of approximately 5–7 days, it maintains stable hormone levels with just 1–2 injections per week.
This makes it an ideal base compound for:
Bulking and strength cycles
Testosterone Replacement Therapy (TRT)
Performance maintenance during cutting phases (at lower doses)
Promotes muscle mass, strength, and power
Enhances libido, mood, and mental clarity
Boosts protein synthesis and recovery
Mass-building cycles (solo or stacked)
Base of all anabolic cycles
TRT or hormone optimization
Can be stacked with Dianabol, Deca, EQ, or Anavar
Testosterone Enanthate, Test E, bulking steroid, TRT injection, long-acting testosterone
Testoboon depot vial is online available for Exports in Maxwell Enterprises
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Country of Origin | Made in India |
Comes in a 1 ml glass ampoule
Each ampoule typically contains:
100 mg/ml of Testosterone Propionate
Testosterone Propionate (100 mg)
Carrier oil (sesame or cottonseed)
Benzyl alcohol (as preservative)
Single-use, sterile unit
Pre-measured dose = accuracy and consistency
Popular in clinical settings or with pharmaceutical-grade testosterone
No contamination risk – fully sealed
Exact dose — no measurement errors
No need to worry about multi-use hygiene
Must use the entire ampoule once opened
Injections required every other day or daily
Expensive when used long-term — needs multiple ampoules per week
Breaking glass ampoules can be messy or hazardous
10 ml multi-dose vial
Common concentration: 100 mg/ml or 200 mg/ml
Total testosterone content: 1,000–2,000 mg
Testosterone Propionate
Carrier oil + preservative (same as ampoule)
⭐ More commonly used than ampoules
Draw any amount based on cycle needs
Ideal for full cycles, stacks, and regular users
Highly flexible dosing – 50 mg, 75 mg, 125 mg, etc.
Cheaper per mg than ampoules
Lasts multiple weeks with a single vial
Perfect for stacking with short-acting injectables
Needs proper sterile technique with each use
Higher risk of contamination if reused carelessly
Must be stored in a cool, dark, clean location
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg |
| Packaging Size | 10 ampoules of 1 Ml |
Injectable testosterone blend (multi-ester compound)
Designed to provide fast and sustained release of testosterone
Sustamaxx typically mirrors the well-known Sustanon formulation, containing four testosterone esters:
Testosterone Propionate – 30 mg
Testosterone Phenylpropionate – 60 mg
Testosterone Isocaproate – 60 mg
Testosterone Decanoate – 100 mg
🟰 Total Testosterone Content: 250 mg/ml
These esters vary in half-life, combining fast onset and long duration of action (from a few days to over a week).
📦 Packaging:1 ml sealed glass ampoule
Each ampoule contains a fixed 250 mg dose of testosterone blend
Single-use: must use entire contents once opened
Testosterone esters as above
Oil-based carrier (usually sesame oil)
Benzyl alcohol (preservative)
Testosterone Replacement Therapy (TRT)
Muscle building in bulking cycles
Enhancing strength, recovery, and performance
Used as a base compound in most steroid cycles
Promotes lean muscle gain and physical strength
Improves libido, confidence, energy, and endurance
Long-lasting release profile = fewer injections per week
Suitable for both beginner and advanced steroid users
Helps preserve muscle mass during caloric deficit
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Country of Origin | Made in India |
Testosterone Propionate
📦 Form:1 ml sealed glass ampoule
Contains 100 mg/ml of Testosterone Propionate
Oil-based, fast-acting injectable
Single-use, sterile unit
Manufacturer: Evolve Biolabs
Test P Ampoule delivers a single, sterile dose of Testosterone Propionate, a short-ester testosterone designed for rapid absorption and quick results. It’s widely used in cutting cycles, recomposition, or short-term testosterone therapy, and is preferred by users who require precision and sterility per injection.
💪 Key Benefits:Fast onset – noticeable effects within a few days
Ideal for cutting, lean mass, or short cycles
Fewer estrogen-related side effects than long esters
Improves strength, libido, and recovery
Suitable for trial runs or quick-acting hormone support
Requires frequent injections (usually every other day)
Less cost-effective per ml
Ampoule handling needs care to avoid breakage
Testosterone Propionate
📦 Form:10 ml multi-dose vial
Contains 100 mg/ml of Testosterone Propionate
Sterile oil-based solution for intramuscular use
Sealed rubber stopper with crimped cap
Manufacturer: Evolve Biolabs
Test P Vial is the preferred format for users running complete cutting or short ester cycles. Offering convenience, cost efficiency, and repeatable dosing, this vial is popular among athletes who want precise hormone control with quick results. The short ester allows for better timing in pre-contest protocols or lean bulking phases.
💪 Key Benefits:Enables tight hormone control
Excellent for short cycles, cutting, and stacking
Less water retention and bloating vs long esters
Fast-acting, ideal for performance enhancement
More affordable over a full cycle compared to ampoules
Requires frequent administration (EOD or 3x/week)
Must use sterile technique for each draw
Best results with consistent timing and dosing
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 50 mg |
| Packaging Size | 10 ampoules of 1 ml |
Testosterone Suspension
📦 Form:1 ml sealed glass ampoule
Contains 50 mg/ml of Testosterone (water-based)
Milky white aqueous suspension
Single-use sterile unit
Manufacturer: Evolve Biolabs
Testobol 50 mg Ampoule contains pure, unesterified testosterone in a water-based suspension, making it the fastest-acting injectable form of testosterone available. Due to the absence of an ester, it provides immediate anabolic effects, making it highly effective for pre-workout injections, short bursts of strength, and aggressive performance enhancement cycles.
This ampoule format ensures maximum sterility, delivering a precise single dose ideal for short-term protocols or athletic peaking strategies.
💪 Key Benefits:Instant testosterone release upon injection
Rapid increase in strength, aggression, and muscle fullness
Excellent for pre-competition prep or power training phases
No ester weight — delivers full testosterone dosage
Improves nitrogen retention, protein synthesis, and muscle pumps
Very short half-life – requires daily or even twice-daily injections
Injection pain is common due to water suspension and particle size
May cause estrogenic side effects if not managed (e.g., bloating, gyno)
Not suitable for beginners due to aggressive hormonal spikes
Must be shaken well before each injection to evenly suspend the testosterone
Short-term cycles for explosive gains
Pre-workout injections for temporary boost
Advanced users stacking with fast-acting orals or esters
Bridging between longer esters during competition prep
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg |
| Packaging Size | 10 ml |
Testosterone Blend (Sustanon-type)
📦 Form:1 ml sealed glass ampoule
Typically contains 250 mg/ml testosterone blend:
Testosterone Propionate
Testosterone Phenylpropionate
Testosterone Isocaproate
Testosterone Decanoate
Oil-based injectable
Single-use sterile ampoule
Manufacturer: Evolve Biolabs
Sustamix Ampoule delivers a precise dose of mixed testosterone esters, designed to provide both fast and long-acting testosterone release. This blend mimics the well-known Sustanon 250 structure, making it suitable for testosterone replacement therapy (TRT) and anabolic cycles.
Ampoules are often chosen for maximum sterility, convenience, and measured dosing, especially in clinical or short-duration protocols.
💪 Key Benefits:Fast-acting and long-lasting testosterone effect
Supports muscle gain, libido, strength, and recovery
Ideal for bulking or maintenance cycles
Suitable for those who prefer sealed single-use units
Minimizes peaks and crashes in testosterone levels
Requires consistent injection timing to maintain hormone stability
Less cost-effective over long cycles
Not ideal for users running high-volume protocols
May cause mild water retention due to estrogen conversion
Testosterone Blend (Sustanon-type)
📦 Form:10 ml multi-dose vial
Contains 250 mg/ml testosterone blend (same as ampoule):
Propionate, Phenylpropionate, Isocaproate, Decanoate
Oil-based injectable
Multi-use sterile glass vial with rubber stopper
Manufacturer: Evolve Biolabs
Sustamix Vial is the cycle-friendly, economical format of the Sustanon-type testosterone blend. Ideal for long-term use, it ensures stable testosterone levels, effective muscle growth, and performance enhancement. It is commonly used in both TRT regimens and bulking cycles, often stacked with other injectables or orals.
This vial format is perfect for athletes looking to administer regular injections over 8–16 weeks or longer.
💪 Key Benefits:Long and short ester synergy for stable blood levels
Enhances anabolism, mood, libido, and stamina
Reduces injection frequency compared to short esters
Cost-effective for extended cycles
Easy to integrate into multi-compound stacks
Requires sterile technique for each draw
Best stored in a cool, dry place away from light
Can cause estrogenic side effects (gyno, water retention) if not managed with aromatase inhibitors
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg |
| Packaging Size | 10 ampoules of 1 ml |
Testosterone Blend (Sustanon-type)
�� Form:1 ml sealed glass ampoule
Contains 250 mg/ml of Testosterone Blend
Testosterone Propionate
Testosterone Phenylpropionate
Testosterone Isocaproate
Testosterone Decanoate
Oil-based injectable for intramuscular use
Single-use, sterile format
Manufacturer: Matrix Laboratories
Sustarix 250 mg Ampoule is Matrix’s version of the well-known Sustanon 250, a multi-ester testosterone compound that provides both fast and sustained testosterone release. This makes it highly suitable for Testosterone Replacement Therapy (TRT) and anabolic cycles, as it maintains stable hormone levels with fewer injections.
The ampoule format is preferred for sterile, single-dose usage, especially in short cycles or clinical applications.
�� Key Benefits:Supports muscle mass, strength, and recovery
Provides stable testosterone levels due to ester blend
Enhances libido, energy, and well-being
Suitable for bulking and maintenance cycles
Ideal for both beginner and advanced users
May cause estrogen-related side effects (water retention, gynecomastia)
Requires use of aromatase inhibitors in sensitive users
Can suppress natural testosterone — PCT is needed post-cycle
Injections usually done 1–2 times weekly for optimal levels
Best stacked with compounds like Deca, Dianabol, or Equipoise
Bulking or strength-focused cycles
Users seeking long-term hormonal stability
TRT users preferring multi-ester testosterone
Common base for nearly all injectable steroid stacks
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Country of Origin | Made in India |
Testosterone Propionate
📦 Form:1 ml sealed glass ampoule
Contains 100 mg/ml of Testosterone Propionate
Oil-based solution for intramuscular injection
Single-use, sterile format
Manufacturer: Matrix Laboratories
Testorix P is Matrix's preparation of Testosterone Propionate, a short-acting testosterone ester known for its fast release and quick results. It is favored by athletes and bodybuilders during cutting cycles or short-term protocols, as it leads to less water retention and provides a harder, drier look compared to longer esters like Enanthate or Cypionate.
Its short half-life (~2–3 days) makes it suitable for users who want rapid hormonal control and tight cycle management.
💪 Key Benefits:Fast-acting — noticeable results in days, not weeks
Enhances muscle hardness, strength, and performance
Less water retention compared to longer esters
Ideal for cutting and recomposition phases
Good option for short cycles or bridging
Requires frequent injections — typically every other day (EOD)
Can cause injection site irritation or soreness in some users
Aromatizes — estrogenic side effects possible without control
Still suppresses natural testosterone — PCT required
Not as convenient as longer esters for long-term use
Cutting cycles or short-duration cycles
Competitive athletes needing quick clearance
Stacks well with Winstrol, Tren A, or Masteron
Used by those who prefer precise hormonal control
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Country of Origin | Made in India |
Testosterone Propionate
�� Form:Multi-dose vial
Strength: 100 mg/ml
Volume: 10 ml vial
Oil-based injectable for intramuscular use
Manufacturer: Testoboon (typically UGL or regional lab)
Testoboon PP contains Testosterone Propionate, a short-acting ester of testosterone that offers rapid hormonal elevation with minimal water retention. Its fast release makes it ideal for cutting cycles, lean muscle preservation, and athletic performance, as it allows tighter control over hormone levels and quick recovery after discontinuation.
Due to its short half-life (about 2 days), frequent injections are required for stable levels.
�� Key Benefits:Promotes lean muscle growth and muscle hardness
Helps maintain testosterone levels during cutting cycles
Minimal water retention compared to longer esters
Enhances strength, libido, and recovery
Fast clearance — ideal for short cycles or pre-contest prep
Requires frequent injections (every other day or daily)
Possible injection site irritation due to high concentration
Aromatizes — estrogen control (e.g. Arimidex) may be needed
May cause androgenic side effects: acne, hair loss, oily skin
Suppresses natural testosterone — PCT required
Men: 100 mg every other day (300–500 mg/week total)
Cycle length: 6–10 weeks
Women: Not typically recommended due to virilization risk
Cutting cycles where definition and dryness are desired
Short-term cycles or “blast & cruise” setups
Users who want fast-acting testosterone with lower water retention
Stacks well with Winstrol, Masteron, or Trenbolone Acetate
Testosterone Propionate, Test P, cutting steroid, short ester testosterone, dry gains
Testoboon pp Vial is online available for Exports in Maxwell Enterprises
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Dose/Strength | 250 mg |
| Packaging Size | 10 ml |
| Packaging Type | Bottle |
| Usage/Application | Muscle Building |
| Age Group | Adult |
Boldenone Undecylenate
Also known as Equipoise, it’s a long-acting injectable anabolic steroid derived from testosterone. Commonly used in lean bulking cycles, known for increasing appetite, vascularity, muscle quality, and strength, with low water retention.
Boldenone Undecylenate: Typically 50 mg/ml or 100 mg/ml
Volume: 1 ml per ampoule (sealed glass vial)
Carrier Oil: Usually sesame or cottonseed oil
Single-use sterile injection
Precise pre-measured dosage
Best for test doses, short cycles, or starter kits
Sterile and contamination-proof (single-use)
Useful when only a limited quantity is needed
Sometimes used by beginners to trial the compound
Low concentration: multiple injections needed to reach optimal dose
Not practical for long cycles (e.g., 10–12 weeks)
Expensive per mg compared to vials
Introductory doses (100–200 mg/week)
Added into blended steroid protocols
Veterinary-grade formulations (common origin of 50 mg/ml ampoules)
Boldenone Undecylenate: Typically 250 mg/ml or 300 mg/ml
Volume: Multi-dose 10 ml vial
Carrier Oil: Usually sterile cottonseed, MCT, or ethyl oleate
Designed for full cycles
Allows precise and flexible dosing
Preferred by intermediate and advanced users
High concentration → fewer injections
Cost-effective for longer use
Practical for stacking and full-cycle planning
Easier to combine with testosterone, deca, tren, etc.
Must follow strict sterility protocols for multi-use
Slightly more susceptible to contamination if mishandled
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Packaging Type | Vial |
| Brand Name | Drostawin 100 Mg |
| Manufacturer | Powerbolic Labs |
| Prescription/Non prescription | Non prescription |
| Country of Origin | Made in India |
1 ml glass ampoule
Typically contains 100 mg/ml of Drostanolone Propionate
Single-use ampoule — sterile, sealed dose
Used in short-term applications, trial injections, or where sterility is top priority
Pre-measured dose = no guesswork
Excellent sterility — ideal for beginners or cautious users
Great for testing tolerance before starting a full cycle
Fixed dosing — cannot split or adjust dose per preference
Requires breaking the ampoule, which can be inconvenient or hazardous
Not ideal for long cycles — you would need many ampoules
100 mg every other day (EOD) for 6–8 weeks
Often used with Testosterone Propionate in cutting cycles
Great for pre-contest prep (last 4–6 weeks)
10 ml multi-dose vial
Usually 100 mg/ml (Drostanolone Propionate)
Or 200 mg/ml (Drostanolone Enanthate)
Ideal for full cutting cycles
Enables precise control over injection volume and frequency
Can be used for 6–10 week cycles with less hassle
Cost-effective over long cycles
Flexible dosing — adjust based on individual needs
Easier to stack with other injectable compounds
Supports advanced and intermediate cycle structures
Multi-use vial must be handled with sterile technique
Requires storage in a cool, dry place, with careful syringe use
Propionate version: 100 mg EOD (3x–4x per week)
Enanthate version: 200–400 mg per week (split into 2 injections)
Stacked with Trenbolone, Testosterone Propionate, or Winstrol in cutting protocols
Drostawin + Testosterone Propionate
Drostawin + Winstrol for a dry, ripped look
Drostawin + Trenbolone Acetate (advanced users)
Weeks 1–8: Drostawin 100 mg EOD
Weeks 1–8: Test Propionate 100 mg EOD
Optional: Winstrol 50 mg/day (last 4–6 weeks)
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Packaging Size | 10 ml Vial |
| Packaging Type | Vial |
| Strength | 100 mg/ml |
| Brand | Primobolon 100 Mg |
| Manufacturer | Powerbolic Labs |
| Usage | Treat anaemia caused due by bone marrow failure |
| Prescription/Non prescription | Non Prescription |
| Country of Origin | Made in India |
1 ml glass ampoule
Typically contains 100 mg/ml Methenolone Enanthate
Most commonly seen in pharmaceutical-grade products (e.g., old Schering/Bayer)
Perfect sterility (single-use = no contamination risk)
Often pharma-grade — higher quality and purity
Useful for first-time use or testing tolerability
Medical use (in some countries for cachexia, HIV-related wasting, etc.)
Athletes needing absolute sterility
Users sourcing authentic Schering Primobolan for premium quality
Fixed dose — no flexibility (entire 1 ml = 100 mg)
Requires multiple ampoules per week for a proper cycle
Breaking ampoules can be inconvenient and risky
High cost per mg compared to vials
10 ml multi-dose vial
Concentration: 100 mg/ml or 200 mg/ml (depending on UGL)
Total content: 1,000–2,000 mg per vial
⭐ Most widely used format for full cycles
Flexible dosing: easily draw 200–400 mg at a time
Cost-effective per mg
Easier to combine with other injectables (Test, Masteron, etc.)
Standard 8–12 week cutting or lean bulking cycles
Intermediate/advanced users stacking with Testosterone, Winstrol, Anavar
Practical for regular injections without wasting multiple ampoules
Must maintain sterile technique to avoid contamination
More susceptible to bacterial exposure if reused improperly
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Brand Name | Stanofit Injection |
| Manufacturer | Powerbolic Labs |
| Usage/Application | Increase In Strength |
| Age Group | Adult |
| Country of Origin | Made in India |
Injectable Stanozolol (commonly known as Winstrol Depot)
Used for cutting, recomposition, and muscle hardening
Stanozolol – 50 mg/ml (common strength)
Administered via intramuscular injection
⚠️ Unlike oil-based steroids, Stanofit is water-based, so it may hurt more on injection and requires more frequent administration.
📦 Packaging:10 ml multi-dose vial
Concentration: 50 mg/ml
Total content: 500 mg per vial
Water suspension of Stanozolol (not oil-based)
Benzyl alcohol (preservative)
Other stabilizers to keep stanozolol suspended in water
⚠️ Must be shaken well before use to ensure even distribution
🎯 Purpose / Uses:Preserves lean muscle mass during cutting
Enhances vascularity and muscle definition
Increases strength without significant weight gain
Often used pre-contest or during fat-loss phases
Dry, hard muscle appearance
Helps reduce subcutaneous water retention
Improves muscle tone and definition
Enhances speed, agility, and explosive power
No estrogen conversion — no risk of gynecomastia
Use smaller gauge needle (e.g., 25G–27G)
Shake the vial well before each use
Inject deep IM (usually glute or deltoid)
Rotate injection sites to avoid irritation
With Testosterone Propionate (cutting stack)
With Masteron, Anavar, or Primobolan for lean gains
Can be stacked with fat burners like Clenbuterol or T3
Avoid stacking with other liver-toxic compounds
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Dose/Strength | 250 mg |
| Packaging Size | 10 ML |
| Packaging Type | Bottle |
| Usage/Application | Muscle Building |
| Age Group | Adult |
Boldenone Undecylenate
📦 Form:1 ml glass ampoule
Each ampoule typically contains 250 mg of Boldenone Undecylenate
Packaged in single-use sealed ampoules
Manufacturer: Evolve Biolabs
Boldabol Ampoule delivers a sterile, oil-based anabolic compound designed for lean mass gain with low estrogenic activity. The ampoule form ensures precise, single-use dosing, preferred by those who prioritize sterility and sealed administration.
💪 Key Benefits:Promotes steady, lean muscle growth
Enhances appetite and endurance
Minimal water retention or bloating
Ideal for longer cycles due to slow-release ester
Clean, injectable form in sealed ampoule packaging
Requires opening a new ampoule for each injection
Less economical for long-term users
Still popular for trial dosing, rotational protocols, or short cycles
Boldenone Undecylenate
📦 Form:10 ml multi-dose vial
Typically contains 250 mg/ml concentration
Sealed rubber stopper with aluminum crimp
Manufacturer: Evolve Biolabs
Boldabol Vial is a long-acting injectable anabolic steroid designed for slow and steady lean muscle gain with very low aromatization. The multi-use vial format is the most popular option for regular users, offering ease of use, cost efficiency, and less packaging waste over long cycles.
💪 Key Benefits:Supports slow, dry, and quality muscle growth
Enhances vascularity and muscle density over time
Very low estrogen conversion – minimal risk of gyno or bloating
Convenient and economical for 6–12 week cycles
Favored by bodybuilders during recomp or lean bulk
Requires proper sterile injection technique each time
Should be stored properly and used within a recommended period after first puncture
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg |
| Packaging Size | 10ml |
| Packaging Type | Vial |
| Brand | Decabol 250 Mg |
| Manufacturer | Evolve Biolabs |
| Also Gives | PCD Pharma Franchise, Third Party Manufacturing |
Nandrolone Decanoate
📦 Form:1 ml glass ampoule
Contains 200 mg/ml of Nandrolone Decanoate
Single-use, sealed unit
Manufactured by Evolve Biolabs
Decabol 200 is a long-acting injectable anabolic steroid known for promoting muscle recovery, joint lubrication, and lean mass gain. The 200 mg strength is ideal for lower-dose cycles or first-time users, though it may require more frequent injections compared to higher concentrations.
💡 Key Features:Slower release due to Decanoate ester
Well-tolerated with low androgenic activity
Often used in bulking and off-season mass-building cycles
Requires multiple ampoules for standard weekly dosing
Nandrolone Decanoate
📦 Form:1 ml glass ampoule
Contains 250 mg/ml of Nandrolone Decanoate
Single-use sealed ampoule
Manufactured by Evolve Biolabs
Decabol 250 ampoule offers a higher concentration than the 200 mg variant, making it more efficient for delivering therapeutic or performance doses. Its single-use, sterile format ensures maximum safety and consistency for users who prefer sealed administration per injection.
💡 Key Features:Suitable for mass-building cycles with fewer injections
Provides smooth, steady anabolic effects
Often stacked with Testosterone, Dianabol, or Anadrol
Still less economical long-term compared to vials
Nandrolone Decanoate
📦 Form:10 ml multi-dose vial
Contains 250 mg/ml of Nandrolone Decanoate
Sealed rubber stopper, aluminum crimp
Manufactured by Evolve Biolabs
Decabol 250 vial is the most widely used form due to its high potency, multi-use convenience, and cost-effectiveness. It provides smooth, long-lasting anabolic action, supporting muscle growth, joint health, and recovery during bulking cycles or therapeutic regimens.
💡 Key Features:Preferred by athletes and clinics for multi-week cycles
More affordable per ml compared to ampoules
Ideal for stacking with testosterone-based compounds
Must be stored properly and used with sterile injection technique
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Packaging Size | 10ml |
| Packaging Type | Vial |
| Brand | Nandrolin |
| Manufacturer | Evolve Biolabs |
| Also Gives | PCD Pharma Franchise, Third Party Manufacturing |
Nandrolone Decanoate
📦 Form:1 ml glass ampoule
Contains 100 mg/ml of Nandrolone Decanoate
Sterile, single-use injectable solution
Manufactured by Evolve Biolabs
Nandrolin 100 mg Ampoule offers a pharmaceutical-grade injectable form of Nandrolone Decanoate, known for its anabolic properties and therapeutic benefits in treating muscle wasting, joint discomfort, and post-surgical recovery. Its single-use ampoule format ensures high sterility and convenience for clinical or trial-based applications.
💪 Key Benefits:Promotes lean mass gain and muscle repair
Enhances joint lubrication and collagen synthesis
Low androgenic and estrogenic side effects
Improves endurance and recovery time
No liver toxicity, ideal for long-term therapy
Requires opening a new ampoule for each injection
Less economical over long cycles
Best for users seeking single-dose accuracy or short treatment
Nandrolone Decanoate
📦 Form:10 ml multi-dose vial
Contains 100 mg/ml of Nandrolone Decanoate
Sealed rubber stopper with crimped aluminum cap
Manufactured by Evolve Biolabs
Nandrolin 100 mg Vial is the preferred format for those on full therapeutic or bodybuilding cycles, offering the same potent anabolic benefits in a multi-use container. Known for its slow, steady release, Nandrolone Decanoate is widely used to support muscle retention, joint health, and recovery in both clinical and athletic settings.
💪 Key Benefits:Ideal for long-term therapy or muscle-building cycles
Convenient multi-dose format for weekly injections
Supports strength, lean tissue growth, and post-cycle maintenance
Lower risk of estrogenic side effects compared to testosterone
Excellent for older athletes or individuals recovering from injury or surgery
Requires sterile technique for each withdrawal
Must be used within a certain time frame once opened
Should be stored properly in a cool, dry place
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Packaging Size | 10 ml Vial |
| Packaging Type | Vial |
| Strength | 100 mg/ml |
| Brand | Primobol |
| Manufacturer | Evolve Biolabs |
| Usage | Treat anaemia caused due by bone marrow failure |
| Prescription/Non prescription | Non Prescription |
| Country of Origin | Made in India |
Methenolone Enanthate
📦 Form:1 ml glass ampoule
Typically contains 100 mg/ml of Methenolone Enanthate
Sterile, single-use injectable oil solution
Manufactured by Evolve Biolabs
Primobol Ampoule provides high-purity Methenolone Enanthate in a sealed glass unit, ideal for those seeking sterile single-use administration. It is a mild, long-acting anabolic steroid, favored in cutting cycles, recomposition phases, or beginner-friendly regimens due to its low androgenic and zero estrogenic activity.
Ampoules are used in clinical settings or by individuals prioritizing maximum sterility for each injection.
💪 Key Benefits:Promotes lean muscle retention during calorie deficit
Enhances definition and vascularity
No aromatization – no estrogen-related side effects
Suitable for women or those sensitive to strong androgens
Ideal for dry gains and aesthetic refinement
May require multiple ampoules per week depending on dosage
Less cost-effective compared to vial for full cycles
Sealed glass ampoules can be delicate and slightly less convenient
Methenolone Enanthate
📦 Form:10 ml multi-dose vial
Typically contains 100 mg/ml of Methenolone Enanthate
Rubber-stoppered vial with aluminum crimp
Manufactured by Evolve Biolabs
Primobol Vial delivers the same long-acting anabolic compound in a multi-use format, making it more practical and economical for athletes running full cycles. Known for its clean anabolic profile, zero estrogenic activity, and excellent tolerability, it’s a favorite among physique athletes and those looking for slow, steady progress without harsh side effects.
💪 Key Benefits:Ideal for long cutting cycles or bridging between cycles
Enhances muscle tone, fullness, and hardness without bulkiness
Non-toxic to liver and non-aromatizing
Easy to manage over time with multi-dose precision
Often stacked with Testosterone, Masteron, or Winstrol
Requires proper sterile technique when withdrawing doses
Best results seen with longer cycles (8–12 weeks) due to slow-acting ester
Should be stored carefully once opened
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Strength | 50 mg |
| Brand Name | Stano-50 |
| Manufacturer | Evolve Biolabs |
| Usage/Application | Muscle Building |
| Age Group | Adult |
| Country of Origin | Made in India |
Stanozolol (Injectable)
📦 Form:1 ml sealed glass ampoule
Contains 50 mg/ml of Stanozolol
Water-based injectable suspension
Single-use, sterile packaging
Manufacturer: Evolve Biolabs
Stano 50 mg Ampoule by Evolve is a high-quality, water-based injectable form of Stanozolol, commonly used in cutting cycles and pre-contest prep. Known for promoting lean, hard muscle gain, vascularity, and fat loss, it is a powerful anabolic steroid with no estrogenic activity, making it ideal for a dry, aesthetic physique.
The ampoule format offers maximum sterility per dose and is often favored for short-term cycles, trial use, or clinical environments.
💪 Key Benefits:Enhances muscle definition and vascular appearance
Promotes lean tissue development without water retention
Improves strength, speed, and power output
Does not aromatize – no estrogen-related side effects
Suitable for cutting, recomp, and pre-competition use
Water-based injections can be more painful than oil-based ones
Requires frequent injections (due to short half-life)
Can be hepatotoxic – liver support is advisable
May cause joint dryness or stiffness in some users
Not suitable for individuals seeking bulk or mass gain
Ideal during final cutting weeks to sharpen muscle detail
Often stacked with Testosterone Propionate, Masteron, or Anavar
Used by athletes for performance enhancement and fat loss
Chosen by physique competitors for a dry, grainy look
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Brand Name | Winvol |
| Manufacturer | Evolve Biolabs |
| Usage/Application | Muscle Building |
| Age Group | Adult |
| Country of Origin | Made in India |
Stanozolol (Injectable)
📦 Form:1 ml sealed glass ampoule
Contains 50 mg/ml of Stanozolol
Water-based injectable suspension
Sterile, single-use packaging
Manufacturer: Evolve Biolabs
Winvol Ampoule provides a high-purity, single-dose form of injectable Stanozolol, a fast-acting, non-estrogenic anabolic steroid. It is widely used during cutting cycles, recomposition, or pre-competition phases to enhance muscle definition, vascularity, and dry appearance.
The ampoule format ensures maximum sterility for each use, favored in short cycles or by users wanting single-use precision.
💪 Key Benefits:Supports lean muscle gain without water retention
Increases vascularity, hardness, and muscle density
Improves strength, speed, and performance
Zero aromatization — no estrogen-related side effects
Ideal for pre-contest or photo-ready preparation
Water-based injections may be painful
Short half-life — requires frequent injections (often daily)
Can cause joint dryness or discomfort
Mild liver toxicity — use with liver support if run for extended periods
Shake well before use (suspension)
Stanozolol (Injectable)
📦 Form:10 ml multi-dose vial
Contains 50 mg/ml of Stanozolol
Water-based injectable suspension
Rubber-stoppered, crimp-sealed glass vial
Manufacturer: Evolve Biolabs
Winvol Vial is the cycle-friendly, cost-effective format of injectable Stanozolol for users running cutting, aesthetic prep, or performance-based programs. It provides dry, hard muscle gains, and is highly popular among physique athletes, sprinters, and fighters.
The vial is suited for daily or every-other-day injections, offering the flexibility and economy needed for a full cycle.
💪 Key Benefits:Promotes a ripped, defined appearance
Excellent for cutting fat while preserving lean mass
No water retention — perfect for aesthetic-focused users
Boosts power-to-weight ratio, ideal for strength athletes
Cost-efficient and practical for full cutting cycles
Requires sterile technique for each draw
Should be shaken thoroughly before every use
Water-based solution can cause localized injection pain
Mildly hepatotoxic — not recommended for long-term use without breaks
Frequent injections are still necessary due to short half-life
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Dose/Strength | 400 mg |
| Packaging Size | 10 ampoules of 1 ml |
| Packaging Type | Ampoules |
| Usage/Application | Increase In Strength |
| Age Group | Adult |
Boldenone Undecylenate
📦 Form:1 ml sealed glass ampoule
Typically contains 250 mg/ml of Boldenone Undecylenate
Oil-based injectable anabolic steroid
Single-use, sterile unit
Manufacturer: Evolve Biolabs
Boldamaxx Ampoule delivers a precise dose of Boldenone Undecylenate, a long-acting anabolic compound commonly used in lean bulking, recomposition, and endurance-enhancing cycles. Known for its slow but steady gains, Boldamaxx provides stable blood levels with low androgenic activity and minimal estrogenic conversion.
The ampoule format ensures maximum sterility, ideal for users who prefer accurate, contamination-free single doses.
💪 Key Benefits:Promotes lean, quality muscle gain without water retention
Enhances vascularity, appetite, and protein synthesis
Very mild estrogenic and androgenic side effects
Long half-life – requires less frequent injections
Excellent for long cycles and stacking with Test or Primobolan
Slow-acting compound — takes time to build noticeable results
Should be used for 10–14 weeks minimum to be effective
Can cause an increase in RBC count or blood pressure over time
Requires pairing with Testosterone base to avoid suppression symptoms
May leave residual oil at the injection site due to thick viscosity
Lean bulk cycles or recomposition programs
Athletes seeking low-side-effect anabolic support
Stack with Testosterone Enanthate, Tren E, or Anavar
Users who value sterile, single-dose packaging
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 400 mg |
| Packaging Size | 10*1ml |
| Packaging Type | Box |
| Brand | Decamaxx |
| Manufacturer | Evolve Biolabs |
| Also Gives | Third Party Manufacturing, PCD Pharma Franchise |
Nandrolone Decanoate
📦 Form:1 ml sealed glass ampoule
Typically contains 250 mg/ml of Nandrolone Decanoate
Oil-based intramuscular injection
Sterile, single-use packaging
Manufacturer: Evolve Biolabs
Decamaxx Ampoule is a long-acting anabolic steroid containing Nandrolone Decanoate, widely known for its ability to promote steady muscle growth, enhance joint lubrication, and improve recovery time. It is especially popular during bulking cycles, helping users gain quality mass with relatively mild androgenic side effects.
The ampoule format is ideal for those seeking sealed sterility, precise dosing, or shorter-term use without committing to a full vial.
💪 Key Benefits:Promotes dense, long-lasting muscle gains
Helps lubricate joints and reduce inflammation
Boosts nitrogen retention and protein synthesis
Fewer androgenic effects than testosterone
Well-tolerated for longer cycles (10–16 weeks)
Slow onset — takes a few weeks to fully kick in
Can suppress natural testosterone production
May cause estrogenic side effects (bloating, water retention)
Requires Testosterone base to avoid libido and mood issues
Not suitable for short cycles due to long half-life
Bulking and strength-focused cycles
Users looking for joint protection during heavy lifting
Stack-friendly with Test E, Dbol, or Boldenone
Suitable for male intermediate to advanced users
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Dose/Strength | 250 mg |
| Packaging Size | 10 ampoules of 1 ml |
| Packaging Type | Ampoules |
| Usage/Application | Increase In Strength |
| Age Group | Adult |
Boldenone Undecylenate
📦 Form:1 ml sealed glass ampoule
Contains 250 mg/ml of Boldenone Undecylenate
Oil-based intramuscular injection
Single-use sterile ampoule
Manufacturer: Matrix Laboratories
Boldarix Ampoule is a pharmaceutical-grade form of Boldenone Undecylenate, a long-acting anabolic steroid favored for its ability to promote steady, quality muscle gains with low androgenic and estrogenic effects. Known for its clean, dry mass-building properties, it is ideal for users who want to improve muscle tone, appetite, and vascularity without heavy water retention.
The ampoule format ensures maximum sterility and accuracy per dose, making it suitable for athletes who require short-term cycles, sterile dosing, or clinical precision.
💪 Key Benefits:Promotes lean, steady muscle growth
Increases appetite, vascularity, and muscle hardness
Low water retention compared to testosterone
Enhances endurance and red blood cell production
Mild on the liver and rarely causes androgenic side effects
Slow-acting — takes 3–5 weeks to show noticeable effects
Should be used in 10–14 week cycles for optimal results
Can increase RBC count — regular monitoring recommended
Requires Testosterone base to prevent suppression symptoms
Not ideal for short-term or fast-result cycles
Lean bulking cycles
Athletes seeking slow, steady quality gains
Those sensitive to estrogenic or androgenic effects
Users stacking with Testosterone Enanthate, Trenbolone, or Anavar
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg |
| Packaging Size | 10*1ml |
| Packaging Type | Box |
| Brand | Decarix |
| Manufacturer | Matrix Biolabs |
| Also Gives | Third Party Manufacturing, PCD Pharma Franchise |
Nandrolone Decanoate
📦 Form:1 ml sealed glass ampoule
Contains 250 mg/ml of Nandrolone Decanoate
Oil-based intramuscular injection
Sterile, single-use format
Manufacturer: Matrix Laboratories
Decarix Ampoule delivers pharmaceutical-grade Nandrolone Decanoate, a long-acting injectable anabolic steroid known for promoting steady, quality muscle mass gains, improved collagen synthesis, and joint protection. It is widely favored in bulking cycles, particularly by those looking for low-androgenic growth with minimal side effects.
The ampoule ensures maximum sterility and precision, ideal for users needing controlled dosing and short-run protocols.
💪 Key Benefits:Promotes slow, sustainable muscle growth
Improves joint comfort and connective tissue strength
Enhances nitrogen retention, recovery, and anabolism
Very mild androgenic activity — lower risk of hair loss or acne
Pairs well with Testosterone Enanthate or Cypionate for bulking
Slow-acting compound — noticeable effects after 3–4 weeks
May cause estrogenic side effects like bloating (though less than testosterone)
Requires testosterone support to maintain libido and mood
Can suppress natural testosterone — PCT is necessary
Should not be used in short cycles due to long half-life
Bulking cycles lasting 10–16 weeks
Athletes needing muscle mass with joint protection
Intermediate to advanced users stacking with Test, Dbol, or EQ
Lifters focused on strength, recovery, and joint health
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Strength | 100 mg |
| Packaging Type | Box |
| Brand Name | Mastarix |
| Manufacturer | Matrix Biolabs |
| Prescription/Non prescription | Non prescription |
| Country of Origin | Made in India |
Drostanolone Propionate
�� Form:1 ml sealed glass ampoule
Contains 100 mg/ml of Drostanolone Propionate
Oil-based injectable anabolic steroid
Single-use sterile format
Manufacturer: Matrix Laboratories
Mastarix 100 mg Ampoule is a fast-acting anabolic steroid based on Drostanolone Propionate, prized for its ability to produce a dry, hard, and defined physique. It is highly favored by competitive bodybuilders, models, and athletes during cutting phases or pre-contest prep, especially when body fat levels are already low.
Because it does not aromatize, it helps users maintain a lean and sharp look without water retention or estrogen-related side effects.
�� Key Benefits:Delivers a dry, grainy, and vascular look
Excellent for cutting cycles and fat-loss protocols
No estrogen conversion – zero water retention
Enhances muscle definition and hardness
Mild androgenic profile – low risk of side effects
Short half-life — requires frequent injections (EOD or daily)
Not suitable for bulking — results are cosmetic and lean
May cause DHT-related sides (acne, hair thinning) in sensitive users
Best used when body fat is already low for maximum effect
Should be combined with a Testosterone base for full hormonal balance
Pre-contest cutting cycles
Photoshoot or event prep for a dry, sculpted look
Stacks well with Winstrol, Trenbolone, or Anavar
For users seeking muscle preservation while dieting
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 100 mg |
| Packaging Size | 10*1ml |
| Packaging Type | Box |
| Brand | Nandrix 100 Mg |
| Manufacturer | Matrix Biolabs |
| Also Gives | PCD Pharma Franchise, Third Party Manufacturing |
Nandrolone Decanoate
📦 Form:1 ml sealed glass ampoule
Contains 100 mg/ml of Nandrolone Decanoate
Oil-based injectable solution
Single-use sterile packaging
Manufacturer: Matrix Laboratories
Nandrix Ampoule is a pharmaceutical-grade preparation of Nandrolone Decanoate, known for promoting steady, high-quality muscle gains with very low androgenic activity. It is especially beneficial for athletes and bodybuilders during long bulking cycles, offering joint protection, enhanced nitrogen retention, and improved muscle recovery.
The 100 mg/ml ampoule format is ideal for users who require precise, low-dose injections, or those following gradual, stacked protocols.
💪 Key Benefits:Promotes slow and consistent muscle growth
Supports joint health and connective tissue recovery
Mild on the liver and low risk of androgenic side effects
Increases nitrogen retention, endurance, and protein synthesis
Compatible with long cycles and stacked regimens
Slow-acting — takes several weeks for full effect
Requires Testosterone base to avoid libido suppression
Can cause mild estrogenic effects (water retention, bloating)
Long half-life — not suitable for short cycles
Requires PCT (Post-Cycle Therapy) to restore natural hormone levels
Mass-building cycles over 10–14 weeks
Athletes needing muscle with joint protection
Great stack companion to Testosterone Enanthate, Dianabol, or Boldenone
Useful for intermediate users seeking low-side-effect bulking results
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Packaging Size | 10X1 ml ampoule |
| Packaging Type | Ampoule |
| Strength | 100 mg/ml |
| Brand | Primorix |
| Manufacturer | Matrix Biolabs |
| Usage | Treat anaemia caused due by bone marrow failure |
| Prescription/Non prescription | Non Prescription |
| Country of Origin | Made in India |
Methenolone Enanthate
📦 Form:Injectable solution (typically 100 mg/ml)
Available in 1 ml ampoules or 10 ml vials
Oil-based, intramuscular use
Sterile and pharmaceutical-grade
Manufacturer: Matrix Laboratories
Primorix is Matrix's formulation of Methenolone Enanthate, widely known as Primobolan Depot. It is a mild, long-acting anabolic steroid prized for producing high-quality muscle gains without water retention or estrogenic side effects. It is particularly valued by athletes during cutting or recomp cycles due to its clean, dry appearance and low androgenic profile.
Primorix is considered one of the safest injectables, suitable even for female use in medical or competitive settings (at low doses).
💪 Key Benefits:Promotes lean, dense muscle growth
Excellent for cutting and aesthetic cycles
No water retention – muscles stay hard and defined
No aromatization – zero estrogenic side effects
Very mild on the liver and has a high safety profile
Mild anabolic strength – not ideal for mass or bulking alone
Can be expensive compared to other injectables
Best results when body fat is already low
Still suppresses natural testosterone over time – PCT recommended
May require frequent injections (2x per week) to maintain stable levels
Cutting cycles focused on retention of lean mass
Recomposition cycles with a caloric deficit
Physique competitors, fitness models, and experienced users
Stack-friendly with Test Propionate, Winstrol, or Anavar
Additional Information:
View Complete details
Minimum Order Quantity: 10 Box
| Strength | 100 mg |
| Brand Name | Stanorix |
| Manufacturer | Matrix Biolabs |
| Usage/Application | Increase In Strength |
| Age Group | Adult |
| Country of Origin | Made in India |
Stanozolol (Injectable)
📦 Form:Injectable suspension (typically 50 mg/ml)
Available in 1 ml ampoules or 10 ml vials
Water-based injectable steroid
For intramuscular use only
Manufacturer: Matrix Laboratories
Stanorix is Matrix’s version of injectable Stanozolol, a dry, fast-acting anabolic steroid best known for creating a hard, lean, and vascular physique. It's ideal for cutting cycles or pre-contest preparation, offering excellent muscle definition without the risk of water retention or estrogen-related side effects.
Injectable Stanozolol is often used by athletes and bodybuilders seeking strength, speed, and dry gains without bloating or fat gain.
💪 Key Benefits:Enhances muscle definition and vascularity
Provides a dry, grainy look with zero water retention
Great for strength gain and explosive power
No aromatization – estrogenic side effects are absent
Often used in pre-contest or athletic prep
Water-based injections can be painful and require frequent administration (daily or every other day)
Can cause joint dryness or discomfort due to lack of water retention
May negatively impact lipid profiles with prolonged use
Mild hepatotoxicity – liver support (like NAC or milk thistle) is recommended
Not suitable for bulking – gains are cosmetic and lean
Cutting or contest-prep cycles
Athletes focused on speed, agility, and power
Often stacked with Test Propionate, Masteron, or Trenbolone
Suitable for both men and women (in low doses)
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg/ml |
| Country of Origin | Made in India |
Comes in a 1 ml sealed glass ampoule
Each ampoule typically contains 250 mg of Testosterone Cypionate
250 mg Testosterone Cypionate
Carrier oil (typically cottonseed or sesame oil)
Benzyl alcohol (as preservative)
Perfect sterility — single-use = no contamination risk
Exact pre-measured dose (no under/overdrawing)
Easy to store and transport individually
Preferred in clinical or TRT settings
1 ampoule = one injection (commonly once or twice per week)
Used in short-term cycles, HRT, or test-only beginner plans
Fixed 250 mg dose = no flexibility
Breaking ampoules can be inconvenient or cause injury
Expensive per mg
Requires multiple ampoules per week for moderate to high doses
10 ml multi-dose vial
Typically contains 250 mg/ml Testosterone Cypionate
Total = 2,500 mg of testosterone per vial
Same as ampoule, but in a multi-dose format
Preserved for multiple uses with benzyl alcohol
⭐ More economical per mg
Flexible dosing (draw 100 mg, 150 mg, 200 mg as needed)
More convenient for long cycles or stacking
Less glass waste and easier transport during cycles
Common in bodybuilding, TRT clinics, and stacked cycles
Suitable for 8–16 week cycles
Easy to combine with Deca, Trenbolone, Primobolan, etc.
Multi-use = must follow strict sterile technique
Risk of contamination if mishandled
Requires proper storage after first use
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg/ml |
| Country of Origin | Made in India |
Testosterone Cypionate
📦 Form:1 ml sealed glass ampoule
Contains 250 mg/ml of Testosterone Cypionate
Oil-based injectable for intramuscular use
Single-use, sterile unit
Manufacturer: Matrix Laboratories
Testorix C is Matrix’s preparation of Testosterone Cypionate, a long-acting testosterone ester with a strong anabolic and androgenic effect. It is widely used in TRT programs and muscle-building cycles to support stable testosterone levels and enhance muscle growth, strength, and libido.
Cypionate has a long half-life (~7–8 days), making it convenient for once or twice weekly injections, and is especially popular in North America.
💪 Key Benefits:Supports muscle mass gain, power, and recovery
Enhances libido, energy, and performance
Smooth, sustained testosterone release
Helps reduce fatigue, low mood, and low T symptoms
Can be stacked with numerous anabolic agents (e.g., Deca, EQ, Tren)
Aromatizes to estrogen – may cause water retention, bloating, or gynecomastia if not controlled
Requires anti-estrogen support in sensitive users (e.g., Arimidex)
Suppresses natural testosterone production – PCT is necessary after cycle
Injection site discomfort possible if not administered properly
Should be used for 8–16 week cycles for best results
Mass-building and strength cycles
Hormone replacement therapy (TRT)
Base compound for most injectable steroid stacks
Used alone or stacked with Dianabol, Deca, or Anavar
Additional Information:
View Complete details
Minimum Order Quantity: 10 Vial
| Strength | 250 mg/ml |
| Country of Origin | Made in India |
Testosterone Cypionate
�� Form:Multi-dose vial
Strength: Typically 250 mg/ml
Volume: 10 ml vial
Oil-based solution for intramuscular injection
Manufacturer: Testoboon (exact licensing varies; often UGL or domestic lab)
Testoboon CP Cypionate is a long-acting testosterone ester designed to deliver sustained hormone release, supporting muscle growth, recovery, and testosterone replacement therapy (TRT). Cypionate is structurally similar to Enanthate but with a slightly longer half-life, making it ideal for weekly or biweekly dosing.
It’s commonly used by athletes and bodybuilders during mass-building phases, and also for those on hormone therapy seeking stable testosterone levels.
�� Key Benefits:Promotes muscle mass, strength, and power gains
Enhances libido, mood, energy, and focus
Long-acting – requires only 1–2 injections per week
Improves protein synthesis and nitrogen retention
Excellent base compound for both beginners and advanced users
Bulking and offseason muscle growth
Testosterone base in most anabolic stacks
TRT users seeking long-term hormonal stability
Stacks well with Deca Durabolin, Dianabol, EQ, or Anavar
Testosterone Cypionate, Test C injection, bulking steroid, TRT testosterone, long-acting testosterone vial
Testoboon cp vial is online available for Exports in Maxwell Enterprises.
Additional Information:
View Complete details